April 9th, 2009 by admin

(1)deep groove ball bearings (for the technical level: P4, P5, P6, P0)
Deep groove ball bearings, the most representative of the rolling bearing, a wide range of uses, affordable two-way axial and radial load capacity. Suitable for high-speed rotation and low noise, low-vibration forum steel bearings or not the application of heat, cold, corrosion, magnetic field, non-insulated, and other fields.
(2) the aligning ball bearing
The outer ring raceway of the aligning ball bearing is spherical, auto-aligning, can add the error caused by the different heart of axis and shaft deflection. It is used to have a shell with the axis of the heart or the axis of different parts of deflection and high-temperature, low cold, corrosive, non-magnetic fields, such as insulation requirements of aligning the site. Note: no more than 3 degrees inclination.
(3) single row angular contact ball bearings (for the technical level: P4, P5, P6, P0)
The angular contact bearing is applicable to high-speed and high precision rotating. In high- temperature, magnetic field, and the water, its accuracy won’t be affected, and it can bear the load synthesis. Standards for the contact angle is of 15 °, 30 ° and 40 °, the greater the contact angle of the axial load capacity of the bigger, the smaller the contact angle of bearing affordable one-way axial and radial load capacity. Generally it is installed in pairs to take.Ceramic Bearings

Ceramic Bearings